Product Description:
LA also can TA: The single spindle automatic lathes TA , are used for the manufacture of a great variety of simple and complex turned parts which are relatively short as compared with their diameters. Max. collet capacity:25mm round for LA25/TA25, 32mm round for oversized LA32H/TA32H machines and 16mm round for TA16. Spindle speed: LA25 135 to 4,100 rpm by 40 steps LA32H 200 to 3,000 rpm by 32 steps TA16 700 to 7,500 rpm by 20 steps TA25 550 to 4,200 rpm by 12 steps TA32H 550 to 4,200 rpm by 12 steps Cross slide with toolholders, front and rear. Double vertical slide with too
Product Description:
Six position mechanical turret with high speed retracting device. Overhead mounted electrical equipment, main power supply,220V, 3 phase and control circuit 110V. Two heavy-duty cross slide with rocker type toolholders. Double vertical slide with toolholders. Feed drive by separate motor with idle time accelerator and set of change gears. Silent bar feed with automatic shut-off. Tool box with complete set of metric tools. Electrical time counter for machine running hours. Electrical work piece counter. waterproof machine light. Electrical shut-off for feed drive clutch. Safety shut-
Product Description:
The single spindle automatic lathes model LD and LD-H, are used for the manufacture of a great vatiety of simple and cimplex turned parts which are relatively short as compared with their diameters. Fot rxsmpl, bolts, screws, nyts, sleeves etc., all kinds of materials such as steel, brass, aluminum etc.can be machined on these autimatic lathes. The new machine, model LD, is available as LD16 and LD26,LD-H as LD26H and LD36H (H: with hydraulic stock chucking provides stronger holding force, reduced chucking time and uses no chuck lever.) Highly efficient in the manufacture of medium a
Product Description:
OPTIONAL ACCESSORIES 6" hollow power chuck (LND42) 8" hollow power chuck(LND65) Tool turret 12 pos. Chip conveyor with cart Parts catcher Extra toolholder Automatic bar feeder
STANDARD EQUIPMENTS
Collet chuck LND42 F48(Max.42) Collet chuck LND65 F72(Max.65) Hydraulic tailstock Hydraulic system Coolant system Automatic lubrication system Work lamp Front door safety interlock Tool box & tool kits Control cabinet heat exchanger Tool turret 8 pos. Spindle dividing system (48 pos.) Bar feeder interface Foot pedal for collet & chuck opening/clamping S
Product Description:
CUTTING MATERIAL !! For brass (copper), Aluminium, free cutting steel, carbon steel, alloy steel, stainless steel, and other bar material. APPLICATION RANGE !! Suitable for mass producing the parts of sanitary ware, gas, valves & cocks, electronics, optics, automobiles, motorcycles, bicycles, needles, art works, office machines, musical equipments, and pneumatic & hydraulic parts, etc.
Product Description:
CUTTING MATERIAL !! For brass (copper), Aluminium, free cutting steel, carbon steel, alloy steel, stainless steel, and other bar material. APPLICATION RANGE !! Suitable for mass producing the parts of sanitary ware, gas, valves & cocks, electronics, optics, automobiles, motorcycles, bicycles, needles, art works, office machines, musical equipments, and pneumatic & hydraulic parts, etc.
Product Description:
Item \ Model MY-220H Number of tool 5 Number of tailshaft 2 Max dia of processing 20 , 15 , 12 Accuracy of dia 0.015 Max length of processing 35 Accuracy of length 0.015 Max dia of drilling Max depth of drilling 30 Max dia of tapping M12XP1.25 , M10XP1.0 Mathspindle speed 1400-5800 R.P.M No. of conversion of mainshafts speed 5 Cam shaft speed 1-30 R.P.M Main motor 2HP 1.5KV Machining oil pump motor 1/4 HP Height from floor to spindle center 1100 Machine dimensions L2270xW615xH1560 Measure
Product Description:
* Full splash guard-With the splash inside the cover, keeps the floor clean. * Cam shaft auto stop-When tapping. Cam shaft can be stoped. Reduce the useful defree of cam for other processing. * Handle safty device-When it changes to automatic from manual, the handle will auto-relief to avoid damage. * Upper-situated control panel-All switches are upper-situated, easy for operation. * Electrial Counter-To set the required quantity. * Warning signal-The machine auto stop and singal flashes in csae of out of turning material, motor overloaded, required quantity completed.
Product Description:
Swiss Type Lathe Syntec or Mitsubishi N/C controller Front-side and Back-side drilling and tapping, milling Built-in Motor Composite turning, drilling, milling and tapping 5 axes turning (x,y,z,x2,z2) Flat Bed Structure Spindle dividing of 4" /1000 Synchronous or Simultaneous Turning available
Product Description:
Swiss Type Lathe Syntec N/C controller Front-side and Back-side drilling and tapping, milling Off-center Drilling and Tapping Slant turning (from 0¢X-90¢X, every 15¢X) Composite turning, drilling, milling and tapping 5 axes turning (x,y,z,x2,z2) Slant Bed Structure (45¢X) Spindle dividing of 4¢X / 1000 Synchronous or Simultaneous Turning available