Product Description:
An internal battery powers the RFID Active Tag. The Active Tag(HT-05) will transmit a RF(Radio Frequency) tag ID data at a pre-set time-interval when power is on. The lifespan of the Active Tag ends when the battery life is exhausted.
The Average current consumption is 45uA when the time-interval is 2 seconds and VCC is 3.3V. Before the battery is exhausted, there will be a low voltage detection and warning signal.
Product Description:
An internal battery powers the RFID Active Tag. The Active Tag(HT-15) will transmit a RF(Radio Frequency) tag ID data at a pre-set time-interval when power is on and environment temperature exceeds certain value such as 29?. The lifespan of the Active Tag ends when the battery life is exhausted.
Product Description:
An internal battery powers the RFID Active Tag. The Active Tag(HT-35) will transmit a RF(Radio Frequency) tag ID data at a pre-set time-interval when power is on and there is no any powerful magnet nearby. The lifespan of the Active Tag ends when the battery life is exhausted.
Product Description:
The RFID Reader detects the presence of all the RFID Active Tag(HT-05, HT-15 & HT-35) series compatible Active tags withing its reading range and continuously streams the data to the system. The RFID Reader provides 3 types of user interface including RS-232, RS-485 and RJ45.
Product Description:
The RF Modules(WAP200A) is high performace transceiver(RX&TX Channel) designed for PCB mounting that will be integrated into a user system. It can be regarded as a wireless component for part of an electronic system. A simple wire can be soldered to the antenna input or the antenna can be printed on the PC board.
Product Description:
The ASK data receiver (RX-100) is a high sensitivity ASK RX only channel modules. The module is mainly intended for the ISM(Industril, Scientific and Medical) band and SRD(Short-Range Devices) frequency band.
Product Description:
GSM transceiver module is the equipment that transmits and receives the short messages to transfer the data through GSM public net. The part of transceiver is the GSM modules, which is the total digital ROM and its performance is stable and relible. Short messages possess the characteristics that cover worldwide and are sued very conveniently.
GSM transceiver module uses GSM modem, and uses AT collection of command like other comomon PSTN modems, which means you can use conveniently and freely. GSM can communicate towards two directions. GSM accepts the inofrmation from the data collection,
Product Description:
GPRS MODEM (GR100) is a wireless data communicating device developed which is based upon advanced GPRS wireless network transmitting technology, and adopts a built-in TCP/IP protocol stack module which has a excellent performance and a stable technological design which has been consummated. The device could achieve various customer data transmitting applications quickly and reliably.
GPRS is the abbreviation of General Packet Radio ServiceBWith respect to the circuit-switched data transferring approach in GSM dialing mode, GPRS is a packet-based switched technology, and the advantages is ga
Frequency 414.995MHz-444.061MHz Distance 1km Voltage DC 3.3V-5.5V Current 100ƒÊA Transmison Power 100mw Adjustable time 10sA30sA2mA5m Test Mode NTC Precision }1? Range -40?-100? Channel 8 Working Temperature -40? ~ +65?
.jpg)
