Product Description:
Polycore Technology is a leading manufacturer of honeycomb and lightweight composite solutions. Thermostat plastic honeycomb holding light weight with stiffness strength ratio and following characteristics: -- energy absorption-- corrosion, fungi, rot, chemical, moisture resistant-- Sound and vibration dampening-- RecyclableThermoplastic honeycomb has specials in -- Electrical characteristics -- Magnetics characteristics- Flexible -- Easy assembly PP honeycomb can be supplied with both sides laminated with non-woven polyester tissue 40 g/m2.This allows better bonding
Product Description:
On the basis of PP honeycomb sheet,this is one new products introduction for application. Fiberglass pre-immerged resin laminated on the both sides of PP honeycomb sheet become into a rigid composite panel. Stiffness and rigirous integration can put into practice without treatment needed. On the surface there are different anti-sliding ,decorative flower pattern are available. (tools requirement) Common width 900mm,1200mm. Length is no limited. Fiberglass pre-immerged weight 440g,660g,880g and above. The finished sheet of 440g is about 0.4¡X0.5mm thickness of surface. Common thickness 1mm s
Product Description:
PP sheet, Polypropylene sheet As a professional manufacturer we can supply you high quality Polypropylene (PP) sheet with reasonable price. Specification details as follows: Thickness: 2mm-30m; Max width: 1500mm; Density: 0.92-0.93g/cm3 Any length and colors are available.
Product Description:
Honeycomb cores are used in the fabrication of lightweight structures. The core material is typically 'sandwiched' between skins of plywood, aluminum, FRP composite material, steel, granite, solid surface materials, paper etc. FRP plastic honeycomb sandwich panel is most popular light weight ,stiffness composite board in practice. Other surface panel can be selected to make sandwich panel according to customer demand. Sandwich board is widely applied in Marine as structural material such as hull, deck, bulkhead, tank, canopies and cases; in Tooling as fabricating tooling and moulds; in truck
Product Description:
Polycore Technology is a leading manufacturer of honeycomb and lightweight composite solutions. Thermostat plastic honeycomb holding following characteristics:
light weight with stiffness strength ratio energy absorption£» corrosion, fungi, rot, chemical, moisture resistant£» Sound and vibration dampening£» Recyclable£» Electrical characteristics£» Magnetics characteristics£» Flexible£» Easy assembly
New polypropylene (PP) honeycomb reportedly provides greater strength-to-weight ratio than traditional polyaramid or aluminum honeycombs. The cells of the PP honeycomb are esse