Product Description:
Thickness of Forming Sheet: 0.3 ~ 0.8 mm , Forming Speed: 16~20 M/min , Roll Shaft Dia: 75~85 mm Dia. Number of Stands: 20 ~ 25 , Main Motor: 10 HP ~ 15 HP , Complete with mandrel type uncoiler and hydraulic cutting device , This machine is controlled by computer system with touch screen .
Product Description:
Thickness of Forming Sheet: 0.4~0.6 m/m , Forming Speed: 3 M/min , Roll Shaft Dia.: 75 mm (Dia.) , Number of Stands: 16~18 , Hydraulic Motor: 15 HP , Measuring device with one tachometer for length counting , This machine is controlled by computer system with touch screen.
Product Description:
Thickness of Forming Sheet: 0.6~1.2 m/m , Forming Speed: 12~16 M/min , Roll Shaft Dia.: 40 mm Dia. Number of Stands: 10~12 , Hydraulic Motor: 7.5 HP ~ 10 HP , Roll stands: 10 ~12sets of roll in SK2-hard chrome coated. Attached with cooling equipment. Complete with uncoiler, hydraulic cutting device and including run-out table. Measuring device with one tachometer and digital display read-out for 0-99999 mm .
Product Description:
Machine size: 6.40m(L)x1.10m(W)x1.25m(H) . Thickness of forming sheet: 1.6 mm - 4.0 mm(depends on which model) . Forming speed: 15 m/min . Roll stands: rollers in SK2-heat treatment. Main motor: over 20 HP in hydraulic system . Complete with uncoiler and hydraulic cutting device and including punching hole device. This line is controlled by computer system with touch screen .
Product Description:
Thickness of Forming Sheet: 1.0~1.2m/m . Forming Speed: 12~16M/min . Roll Shaft Dia.: 60mm Dia. Number of Stands: 10~12 . Hydraulic Motor: 20HP . Roll stands: 10 ~12sets of roll in SK2-hard chrome coated. Complete with uncoiler, hydraulic cutting device and including run-out table. Measuring device with one tachometer and digital display read-out for 0-99999 mm .
Product Description:
Thickness of forming sheet: 0.3 mm ~ 0.8 mm , Forming speed: 20 m/min. Roll shaft dia: 75 mm dia in S45C , Roll stands: 20 sets of roll in SK2-hard chrome coated , Main motor: 10 HP in hydraulic system , Complete with whole set of laminated equipment on the top of rollformer. Attached with mandrel type uncoiler and hydraulic cutting device .
Product Description:
Thickness of Forming Sheet: 0.4~0.6 m/m , Forming Speed: 4~6M/min , Roll Shaft Dia.: 60mm Dia. Number of Stands: 8~10 , Hydraulic Motor: 7 1/2HP , Roll stands: 8 ~10sets of roll in SK2. Attached with one set of press mould for crimping used Complete with uncoiler, hydraulic cutting device. Controlled by computer system with touch screen.
Product Description:
Thickness of Forming Sheet: 0.4~0.7m/m , Forming Speed: 12~16M/min , Roll Shaft Dia.: 40mm Dia. Number of Stands: 10~12 , Hydraulic Motor: 5HP , Roll stands: 10 ~12sets of roll in SK2-hard chrome coated. Complete with uncoiler, hydraulic cutting device and including run-out table. Measuring device with one tachometer and digital display read-out for 0-99999 mm .
Product Description:
Thickness of Forming Sheet: 0.4~0.5 m/m , Forming Speed: 12~16 M/min , Roll Shaft Dia.: 40mm Dia. Number of Stands: 10~12 , Hydraulic Motor: 5 HP , Roll stands: 10 ~12sets of roll in SK2-hard chrome coated. Complete with reel type uncoiler, hydraulic cutting device and including run-out table. Measuring device with one tachometer and digital display read-out for 0-99999 mm .
Product Description:
This roll forming machine can rollform two different types of meta roofing sheets without changing any rollers. One is normal rectangular roofing sheet, but the other one is extraordinary tapered roofing sheet. The tapered sheet is produced in the same processes of normal roofing sheet. In other words, there is no extra complicated processes. After roll formed by this roll forming machine, the surface will be very smooth and beautiful without any scratch on surface. You just need to put normal coil into uncoiler, and then key in the narrow width ,broad width and the length on the control pan
.gif)
