Product Description:
EDM drill EDM EDM drill EDM machine electrical discharge machine 1. CE certificate as standard 2. Overcut (gap) on each side is 0.05~0.2 mm. 3. The use of pure water as working fluids for cost saving and extra safety. 4. Precision (hole straightness) is approx 0.04 mm¡Ó 0.02 mm. 5. For drilling 0.3 mm holes, copper is better than brass pipe. 6. Able to drill extremely hard material such alloys etc.
Product Description:
Model No. TSH - 3 AA X & Y Axes Travel 250 x 200 mm Z Axes Travel 370 mm Machine Head Movement 200 mm Size of Stainless Fixed Base 400 x 190 mm Size of Working Pan 560 x 390 mm Maximum Table Weight Capacity 150 Kgs. Max. Distance from Guide Unit to Worktable 220 mm Machine Dimension (L x W x H) 710 x 1030 x 1915 mm Dielectric Water Dielectric Volume 33 Liters Dimension of Dielectric Tank (Valid Size) 480 x 350 x 200 mm Floor Area of Dielectric system 880 x 540 mm Max. Machining Current 30 AMP (for 0.15mm ~ 3.0mm) Max. Power Consumption 5.5 KVA
Product Description:
Model No. TSH - 40 X x Y x Z Axes Travel 400 x 400 x 380 mm Machine Head Travel 300 mm Worktable Size 465 x 500 mm Stainless Vice Unit Size 510 x 515 mm Max. Distance between Guide Unit and Worktable 350 mm Max. Machining Current 40 A Max. Power Consumption 5 Kva Input Voltage 50 / 60 Hz ( As Reguest ) Dielectric Fluid Water Dielectric Volume 20 L Machine Dimension 1100 x 1600 x 1900 mm Machine Net Weight 1100 Kgs
Product Description:
Automatic brass-tube (30-unit) change. Automatic brass-tube devition correcting. Direct readout of the G code of NC wire-cut program and automatic readout of start-cutting point and guide of fine-hole drilling point. Automatic edge and center finding.
Product Description:
Drilling capacity from 0.2 mm to 3.0 mm diameter brass or copper electrode tubes. The flushing medium used by this machine is distilled water and environment friendly. Automatic pressure rease function is used in the system. Worktable is made of stainless steel to maintain longer life.
Product Description:
Drilling capacity from 0.2 mm to 3.0 mm diameter brass or copper electrode tubes. The flushing medium used by this machine is distilled water and environment friendly. Automatic pressure rease function is used in the system. Worktable is made of stainless steel to maintain longer life.
Product Description:
Drilling capacity from 0.2 mm to 3.0 mm diameter brass or copper electrode tubes. The flushing medium used by this machine is distilled water and environment friendly. Automatic pressure rease function is used in the system. Worktable is made of stainless steel to maintain longer life.
.jpg)
.jpg)
.jpg)
.jpg)
