Product Description:
I.Calcium carbide:25-50mm/50-80mm/80-200mm Gas yieldness:285L/295L/300L kg Packing: 50kg/100Kg iron drum sealed with nitrogen gas or soft packing
II. desulphurization agent Calcium carbide: 0.2-2mm/0.5-5mm/5-15mm Packing: 50kg/100Kg iron drum sealed with nitrogen gas or soft packing
Product Description:
sodium sulphide 60%min Red color :Na2S 60%MIN Fe 0.15%MAX Na2SO32.0% MAX Na2S2O32.0% MAX Na2CO3 5.0% MAX WATER INSOLUBLE 0.4% MAX yellow color(low Fe content) Na2S 60%MIN Fe 30PPM MAX(0.003%) 50PPM(0.005)80PPM 0.008% Na2SO3 2.00% MAX Na2S2O32.00% MAX Na2CO31.80% MAX WATER INSOLUBLE0.18%MAX Packing : Solid- in 150KG iron drums , Flakes- in 25KG p.w. bags
Product Description:
1. A formula prepared from composite materials with high load bearing capacity and strong extreme pressure & wear resistance. 2. Odorless premium propellant included. 3. Leaving perfect surface of the product, without oiliness. 4. Non-toxic and non-corrosive. 5. Allowing for a maximum number of mold releasing cycles, saving on the cost. 6. S-200A and S-300A free from silicone oil. 7. High-pressure cans are used, safe for use. 8. Suitable for use as plastic mold release for ABS, PVC, PE, NYLON, ACRYLICS, PS, PP, PC and SAN products. S-230A also suitable for forming of rubber or EV
Product Description:
1. Formula laden with premium solvent and surface active agent.
2. S-520 and S-520B volatilize slowly, while S-520A volatilizes quickly, but with descaling ability not so effective as S-520 and S-520A.3. Softening and removing paint.
4. Compared to S-520, S-520A has stronger odor. But S-520A has better contaminant removing ability than S-520.
5. When removing contaminants on molds, spray this product on the contaminants, and leave the contaminants soaked by this product for several minutes. After that, use a soft cloth to wipe it clean. Or, just like norm
Product Description:
High performance diesel engine oil with the latest additive formula designed to meet lubrication requirements of turbo-charging normally aspirated diesel engines. It extends oil exchange cycles, so that the engine stays in the best condition in long-term running.
Product Description:
Excellent anti-wear property helpful to gear wearing reduction. Strong load bearing capacity. Perfect anti-oxidation, high temperature stability, anti-form and oil/water separation properties. No lead included. Safe for use. Suitable for use in circulatory or oil bath lubrication of heavy load gear transmission systems with straight, bevel or taper gears.
Product Description:
A low viscosity oily cutting solution with chlorinated extreme pressure additive applicable to all metals. Having solvent volatility & drainage. Suitable for use in grinding and honing.
Product Description:
Sodium hydrosulfite is used in textile industry for vat dyeing, reduction cleaning, printing and stripping, also used in bleaching paper pulps, especially mechanical pulp, bleaching kaolin clay and food stuffs. Specification: 85%, 88% and 90% Packing:50kg iron drums with double inner plastic bags
Product Description:
Chemical formula: (NaPO3)6 Molecular weight: 611.82 Standard executed: HG/T2837-1997 Properties: White powder, relative density is 2.484 (20 degree centigrade), easily soluble in water, but not in organic solution, absorbent to dampness, and turn sticky when absorbed dampness in air. It is possible to form solvent compound with metallic ions such as Ca, Ba, Mg, Cu and Fe; It is a fine agent for water treatment.
Technical Specifications: 1.Industrial grade: (1)Total phosphate, as P2O5(Min)%:68.0 (2)Inactive phosphate, as P2O5(Max)%:7.5 (3)pH of 1% water solution:5.8-7.3 (4)Solubility
Product Description:
Chemical formula: Na5P3O10 Molecular weight: 367.86 Standard executed: GB9983-88 Properties: White microdot powder with luster, melting point at 622 degree centigrade, easily soluble in water, with remarkable chelating ability to some metal ions such as Ca2+, Mg2+, can soften hard water, change suspension into solution, slightly alkaline, without causticity.
Technical Specifications: 1.Industrial grade: (1)Main content(Min)%:94.0 (2)P2O5(Min)%:57.0 (3)pH of 1% water solution:9.2-10.0 (4)Iron, as Fe(Max)%:0.015 (5)Water insoluble(Max)%:0.1 2.Food grade: (1)Main content(Min)%:94.0
.jpg)
.jpg)
.jpg)
.jpg)
(1).jpg)
(1).jpg)
